Add Insteon Remote Control to Window Shutters, Blinds, Projector Screens and More
Micro Open/Close Module is the first Insteon device designed specifically for up/down and open/close 110V motor-controlled appliances.
Micro Modules keeps your antique, toggle or decorative wall switches by installing behind your existing switch. Due to its hidden nature, we highly recommend Insteon app with Insteon Hub to manage Micro Open/Close.
Sometimes the couch is just too comfy and that window blinds switch is just too far away. Grab your smartphone and open and close your window blinds to your heart's content.
Automatically doll down window blinds at dusk. Wake up to a gentle pseudo-sunrise rolled up window blinds at 7AM. You can schedule individual window blinds or full groups of blinds for particular hours and days of the week.
With the Insteon Hub, scenes really take on a new level. Configure "Movie Mode" to turn off the lights while rolling down the projector screen and closing down any window shutters and blinds.
Window, Shutters, Blinds, Projector Screens
By default, it comes programmed for latching, single momentary and dual momentary switches; easily configured for single and dual momentary switches with a simple reprogramming procedure during installation.
|Manufacturer Product No.||2443-222|
|Insteon||Controller and responder|
|Load Brightness Levels||32 locally (256 with software)|
|Status LED||Green when load is On | Red when load is Off
Blinks Red once when responder does not acknowledge | blinks Green once if all responders acknowledge (can be disabled via software)
Blinks Green or Red during setup
Blinks Red to indicate traffic (must be enabled via software)
|LED Brightness||Adjustable from off to 100% bright|
|Commands Supported As Controller||On | Off
Fast On | Fast Off
Begin Brighten | End Brighten
Begin Dim | End Dim
|Commands Supported As Responder||Open (On) | Close (Off)
Fast On | Fast Off
Begin raise (Brighten) | End raise (Brighten)
Begin lower (Dim) | End lower (Dim) Beep
|RF Range||150 ft. (depending on your home’s construction)|
|Phase Detect Beacon||Yes|
|Insteon Device Category||0x0E window coverings|
|Insteon Device Subcategory||2444-222 (915MHz) | 0x01|
|Mounting||Behind switch or above light fixture in single-gang electrical box|
|Wire Connections||Sense 1 (yellow): 24 AWG, 0.205mm⊃2;
Sense 2 (purple): 24 AWG, 0.205mm⊃2;
|Max. Cable Size||4mm⊃2;, 12 AWG (2.72mm diameter)|
|Min. Cable Size||1.5mm⊃2;, 15 AWG|
|Screw Clamp Connections||Line
Load 1(Second Terminal) Neutral
|Plastic||UV stabilized ABS+PC|
|Beep On Button Press||Beeps when button is pressed or connected switch is tapped (must be enabled via software)|
|Dimensions (H x W x D)||1.8" x 1.8" x 0.6"|
|Operating Temperature Range||32° to 104°F (0° to 40°C)|
|Voltage||100VAC to 240VAC|
|Frequency||50/60Hz auto-detected at power-up|
|Maximum Load||8A Resistive
|Hardwired Remote Control||Yes, dual momentary switches supported|
|Retain All Settings Without Power||Yes, saved in non-volatile EEPROM|
|Standby Power Consumption||<1W|
|Certifications||FCC, UL, IEC, EN|